Plantilla:Infobox protected area/doc

This template can be used to generate an infobox for a protected area. It is part of the Protected areas WikiProject.

The "basic usage" templates includes selected parameters which can be used to form a completely functional infobox. The "full usage" template includes all of the extra parameters which may be added. Either can be pasted into a new article. See below for working examples.

{{{name}}}
{{{alt_name}}}
An unknown IUCN category was entered.
[[File:{{{photo}}}|{{{photo_width}}}|alt={{{photo_alt}}}|{{{photo_alt}}}]]
{{{photo_caption}}}
Map showing the location of {{{name}}}
Map showing the location of {{{name}}}
{{{map_caption}}}
Location{{{location}}}
Nearest city{{{nearest_city}}}
Coordinates0°N 0°E / 0°N 0°E / 0; 0{{{coords_ref}}}
Length{{{length}}}
Width{{{width}}}
Area{{{area}}}{{{area_ref}}}
Elevation{{{elevation}}} or
{{{elevation_avg}}}, {{{elevation_min}}}, {{{elevation_max}}}
Dimensions{{{dimensions}}}
Designation{{{designation}}}
Authorized{{{authorized}}}
Named for{{{named_for}}}
Visitors{{{visitation_num}}} (in {{{visitation_year}}}){{{visitation_ref}}}
Governing body{{{governing_body}}}
World Heritage site{{{world_heritage_site}}}
Website{{{website}}}
{{{embedded}}}
{{{embedded2}}}


Basic usage Full usage
{{Infobox protected area
| name = 
| alt_name = 
| iucn_category = 
| iucn_ref =
| photo = 
| photo_width = 
| photo_alt = 
| photo_caption = 
| map = <!-- or | map_image = -->
| map_width = 
| map_alt = 
| map_caption = 
| relief =
| label =
| label_position =
| mark =
| marker_size =
| location = 
| nearest_city = 
| coordinates = 
| coords_ref = 
| area_ha = 
| designation =
| authorized =
| created =
| designated =
| established = 
| visitation_num = 
| visitation_year = 
| visitation_ref =
| governing_body = 
| administrator =
| operator =
| owner =
| world_heritage_site =
| website = 
| url = 
| child = 
| embedded = 
}}
{{Infobox protected area
| name = 
| alt_name = 
| iucn_category = 
| iucn_ref =
| photo = 
| photo_width = 
| photo_alt = 
| photo_caption = 
| map = <!-- or | map_image = -->
| map_width = 
| map_alt = 
| map_caption = 
| AlternativeMap = 
| relief =
| label =
| label_position =
| mark =
| marker_size =
| location = 
| nearest_city = 
| nearest_town =
| coordinates = 
| coords_ref = 
| length =
| length_mi =
| length_km =
| width =
| width_mi = 
| width_km =
| area = 
| area_ha =
| area_acre =
| area_km2 =
| area_sqmi =
| area_ref = 
| elevation = 
| elevation_avg = 
| elevation_min = 
| elevation_max = 
| dimensions = 
| designation =
| authorized =
| created =
| designated = 
| established = 
| named_for = 
| visitation_num = 
| visitation_year = 
| visitation_ref =
| governing_body = 
| administrator =
| operator =
| owner =
| world_heritage_site =
| website = 
| url = 
| child = 
| embedded = 
| embedded1 = 
| embedded2 =
}}

Parameter descriptions

revisa

This table describes all parameters which can be used in building infoboxes. Only the name parameter must be assigned a value.

Field name Description
name Required. The official name of the protected area. It will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is Mount Washington (New Hampshire) then name=Mount Washington.
alt_name If there is a common English name for the area use for the name parameter. This parameter can be used to display the name in the local language or for an alternate English name if it is commonly used. If you would like to italicize the text use wiki markup.
iucn_category Strongly recommended. The IUCN category associated with the protected area. Valid values are Ia, Ib, II, III, IV, V, or VI. See IUCN Categories.
iucn_ref A reference for the iucn_category.
photo The name of an image file to be displayed. No special formatting is needed.
photo_width Can be used to change the display width the image. The default and maximum value is 284px. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) may need to be adjusted to 180px or 220px. For example photo_width=200 and not photo_width=200px.
photo_alt Alt text for the photo, for visually impaired readers. See WP:ALT.
photo_caption The caption which will appear below the image if one is required.
map The name of the location map to be displayed. See Map display methods. To use a static image, use |map_image=
map_image The file name of a static map image to be displayed. To use a location map, use |map=.
map_width Width to display the map image in pixels. The default and maximum is 284, but usually the map should be much smaller. For example: map_width=200 (not map_width=200px). If a location map template is used the map size might be scaled automatically if no width is specified.
map_alt Alternative text for the map image, see WP:ALT.
map_caption Text to be displayed below the map image, if required.
AlternativeMap Use an alternative map for the location map, where available. For additional information, see Template:Location map#AlternativeMap parameter.
relief When the geographical coordinates method is used (see Map display methods), any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available. For additional information, see Template:Location map#Relief parameter.
label A text message that will be displayed next to the marker. Works with label_position below.
label_position Specifies the position of a label with respect to the marker. This is not functional when using the XY method for map display. It must be assigned a value or no label will not display. Valid values are left, right, top and bottom. See label above.
mark The image to use for the marker. The default is Red pog.svg, unless map=us locator blank.svg in which case the default is Green pog.svg. See Template:Location map for more information.
marker_size The display width of the marker image in pixels. The default value is 8.
location The location of the protected area. Don't be too precise. County, state and country are good in the USA. If the area is within a city specify the city, state and country. If the area is in multiple counties just list the state and country. For areas in other countries adjust accordingly.
nearest_city
nearest_town
Recommended if the area is not within a city or town. It could be a city with a major airport or a large gateway town where supplies and lodging are available. Use the most appropriate parameter.
coordinates
coords
For the {{coord}} template. The parameters |format=dms and |display=inline,title are recommended. Its coordinates can be used with the location map. (Unless a value for type: is provided, the template will automatically use type:landmark. See the {{Coord}} page for more info.)
coords_ref Can be used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using <ref>...</ref> tags.
length Length of protected area, e.g., length of a trail. The {{Convert}} template should be used.
length_km
length_mi
Length of protected area, with automatic conversion to metric/imperial units.
width Width of protected area. Can be used with |length= to describe rough shape. The {{Convert}} template should be used.
width_km
width_mi
Width of protected area, with automatic conversion to metric/imperial units.
area Area of the protected area. Usually in acres or square miles for US locations and hectares or square kilometres elsewhere. The {{Convert}} template should be used. Very small areas might be specified in square feet, square yards or square metres.
area_km2
area_sqmi
area_acre
area_ha
Area of the protected area, with automatic conversion to metric/imperial units. Preferred to using bare |area=
area_ref Reference to reliable source for area value.
elevation Elevation of the protected area.
dimensions Dimensions of the protected area.
designation
authorized
created
designated
established
The date the protected area was created. See below. Use {{Start date}}. For example, for Yosemite National Park, use {{Start date|1890|10|1}}.
named_for
visitation_num The number of visitors in a recent year if known.
visitation_year The year during which the number of visitors was counted.
visitation_ref Used with the visitation parameters above. Highly recommended. Specify the a citation for the visitation data using <ref>...</ref> tags.
governing_body
administrator
operator
owner
The agency or organization which controls or owns the protected area. See below.
world_heritage_site The year the protected area was designated a World Heritage Site. Few areas have this designation. If the article uses {{Infobox World Heritage Site}} then this parameter should not be used.
website
url
The full URL of the official website with no formatting. For example: http://www.example.org/. Use |website= to display it with the label "Website" or use |url= to display it with no label.
child Set to "yes" if this infobox is embedded inside another infobox.
embedded
embedded1
Another infobox to place within this infobox. It will show up at the bottom. It needs to have its "embed" or "child" parameter set to 1 or yes, as appropriate.
embedded2 A second embedded infobox.

Alternate parameters

revisa

A few cells allow alternate parameter names which can be used to generate an appropriate label. Editors should probably not be overly concerned with using the correct label unless using the wrong label would be a blatant error.

Authorizedauthorized
Createdcreated
Designateddesignated
Establishedestablished

Protected areas are often created as the result of a governmental procedure. For example, in the United States, national parks are established by an act of congress, National Monuments are usually created by presidential proclamation, and wilderness areas are designated by an act of congress. National Park Service Affiliated Areas are authorized.

authorized → Authorized
created → Created
designated → Designated
established → Established
Governing bodygoverning_body
Administratoradministrator
Operatoroperator
Ownerowner

Some areas are privately owned, and it might be inappropriate to use the label Governing body. For example, the Aleutian World War II National Historic Area is affiliated with the National Park Service but is owned by the Ounalashka Corporation. Chimney Rock National Historic Site is operated by the Nebraska State Historical Society.

governing_body → Governing body
administrator → Administrator
operator → Operator
owner → Owner
Websitewebsite
url

The website can be displayed with or without a label.

website → Website
url → (no label)

IUCN Categories

revisa

Depending on the value of the iucn_category parameter, one of the following banners will be displayed below the name. Valid values are Ia, Ib, II, III, IV, V and VI. For more information read the IUCN protected area categories article. If you cannot find the correct code in a reliable source, leave blank.

IUCN category Ib (wilderness area)
IUCN category II (national park)
IUCN category IV (habitat/species management area)
IUCN category V (protected landscape/seascape)
IUCN category VI (protected area with sustainable use of natural resources)

Examples

revisa

With map only

revisa
Ku-ring-gai Chase National Park
IUCN category II (national park)
Error de Lua en Módulo:Location_map en la línea 501: Unable to find the specified location map definition. Neither "Module:Location map/data/Australia" nor "Template:Location map Australia" exists.
LocationNew South Wales, Australia
Nearest citySydney
Coordinates33°39′3.6″S 151°12′3.6″E / 33.651000°S 151.201000°E / -33.651000; 151.201000
Area154 km2 (59 sq mi)
Established 1, 1967 (1967-10-01)
Visitors2 million (in 2001)
Governing bodyNational Parks and Wildlife Service (New South Wales)
{{Infobox protected area
| name = Ku-ring-gai Chase National Park
| iucn_category = II
| map = Australia
| relief = yes
| map_width = 200
| map_alt = A map showing the location of the park on the east coast of Australia
| location = [[New South Wales]], Australia
| nearest_city = [[Sydney]]
| coordinates = {{coord|33|39|3.6|S|151|12|3.6|E|region:AU|display=inline}}
| area_km2 = 154
| established = {{start date|1967|10|1}}
| visitation_num = 2 million
| visitation_year = 2001
| governing_body = [[National Parks and Wildlife Service (New South Wales)]]
}}

With photograph only

revisa
Yosemite National Park
IUCN category II (national park)
Mountain valley with sheer cliff on its left side, and a waterfall cascading into its right, with a clear blue sky above and many green trees below
Yosemite Valley from Tunnel View
LocationCalifornia, United States
Nearest cityMariposa
Coordinates37°43′44″N 119°35′54″W / 37.72889°N 119.59833°W / 37.72889; -119.59833
Area761,266 acres (3,080.73 km2)
Established 1, 1890 (1890-10-01)
Visitors3,280,911 (in 2004)
Governing bodyNational Park Service
World Heritage site1984
www.nps.gov/yose/
{{Infobox protected area
| name = Yosemite National Park
| iucn_category = II
| photo = Tunnel View, Yosemite Valley, Yosemite NP - Diliff.jpg
| photo_alt = Mountain valley with sheer cliff on its left side, and a waterfall cascading into its right, with a clear blue sky above and many green trees below
| photo_caption = Yosemite Valley from Tunnel View
| location = [[California]], United States
| nearest_city = [[Mariposa, California|Mariposa]]
| coordinates={{coord|37|43|44|N|119|35|54|W|display = inline <!-- for documentation page only - not general practice -->}}
| scale = 300000
| area_acre = 761266
| established = {{start date|1890|10|1}}
| visitation_num = 3,280,911
| visitation_year = 2004
| governing_body = [[National Park Service]]
| world_heritage_site = 1984
| url = http://www.nps.gov/yose/
}}

With no photograph or map

revisa
Harz National Park
Nationalparkverwaltung Harz
IUCN category II (national park)
LocationLower Saxony and Saxony-Anhalt, Germany
Coordinates51°47′00″N 10°34′00″E / 51.78333°N 10.56667°E / 51.78333; 10.56667
Area8,900 ha (34 sq mi)
Established1990, 1994, 2006
Governing bodyNationalparkverwaltung Harz
{{Infobox protected area
| name            = Harz National Park
| alt_name        = ''Nationalparkverwaltung Harz''
| iucn_category   = II
| location        = [[Lower Saxony]] and [[Saxony-Anhalt]], Germany
| nearest_city    = 
| coordinates     = {{coord|51|47|00|N|10|34|00|E|region:DE_type:landmark|display=inline}}
| area_ha         = 8900
| established     = 1990, 1994, 2006
| visitation_num  = 
| visitation_year = 
| governing_body  = Nationalparkverwaltung Harz
}}

With photograph and map

revisa
Dry Island Buffalo Jump Provincial Park
A green valley with a river and a road running somewhat parallel to the river
Panoramic view
Error de Lua en Módulo:Location_map en la línea 501: Unable to find the specified location map definition. Neither "Module:Location map/data/Canada Alberta" nor "Template:Location map Canada Alberta" exists.
LocationAlberta, Canada
Nearest cityThree Hills
Coordinates51°56′10″N 112°57′41″W / 51.93611°N 112.96139°W / 51.93611; -112.96139
Area34.5 km2 (13.3 sq mi)
Established 15, 1970 (1970-12-15)
Governing bodyAlberta Tourism, Parks and Recreation
{{Infobox protected area
| name = Dry Island Buffalo Jump Provincial Park
| photo = Dry Island Provincial Park2.jpg
| photo_alt = A green valley with a river and a road running somewhat parallel to the river
| photo_caption = Panoramic view
| photo_width = 260
| iucn_category = III
| map = Canada Alberta
| map_alt = Location the park in south central Alberta, Canada
| map_caption = Map of Alberta, Canada
| relief = yes 
| map_width = 200
| location = [[Alberta]], Canada
| nearest_city = [[Three Hills, Alberta|Three Hills]]
| coordinates     = {{coord|51|56|10|N|112|57|41|W| display = inline <!-- for documentation page only - not general practice -->}}
| coords_ref = 
| area_km2 = 34.5
| established = {{start date|1970|12|15}}
| governing_body = [[Alberta Tourism, Parks and Recreation]]
}}

With embedded alternate map

revisa
Black Forest National Park
IUCN category II (national park)
Location of the Black Forest National Park in the northwestern Black Forest
LocationBaden-Württemberg, Germany
Coordinates48°33′40″N 8°13′17″E / 48.56111°N 8.22139°E / 48.56111; 8.22139
Error de Lua en Módulo:Location_map en la línea 501: Unable to find the specified location map definition. Neither "Module:Location map/data/Germany" nor "Template:Location map Germany" exists.
{{Infobox protected area
| name = Black Forest National Park
| iucn_category = II
| image_map = Nationalpark-Schwarzwald-Lageplan.png
| map_alt = 
| map_caption = Location of the Black Forest National Park in the northwestern Black Forest
| relief =
| location = [[Baden-Württemberg]], Germany
| coordinates     = {{coord|48|33|40|N|8|13|17|E| display = inline <!-- for documentation page only - not general practice -->}}
| embedded = {{Location map | Germany
 | AlternativeMap = Karte Nationalparks Deutschland high.png
 | caption = Black Forest National Park in the southwest of the map
 | coordinates     = {{coord|48|33|40|N|8|13|17|E}} 
 | border = none
 | width = 300
 }}
}}

Map display methods

revisa

Any image of a map showing the location of the protected area can be used.

Display a marker on a map using a template and geographic coordinates

revisa

A marker can be superimposed on a map using one of a set of special map templates. To display a marker, the geographic coordinates must be specified using the {{Coord}} template inside the |coordinates= parameter. See the documentation for {{Location map}}. The parameters for this template map to a subset of the parameters used by {{Location map}}. A map template can be found using these sources:

List of templates – Many of the listed items are redirects and a few templates may not function as expected.
Category:Location map templates - templates sorted by category.
Special:WhatLinksHere/Template:Location map/Info – a search that might help.
Special:PrefixIndex/Module:Location map/data/ – another search that might help.
Special:Prefixindex/Template:Location map – another search that might help.

All of the names begin with the words "Location map" followed by the area covered. The value you need to specify is the area name. The map template for Canada is Location map/data/Canada. In this case specify |map=Canada.

Four Corners, Canada
Error de Lua en Módulo:Location_map en la línea 501: Unable to find the specified location map definition. Neither "Module:Location map/data/Canada" nor "Template:Location map Canada" exists.
Coordinates60°N 102°W / 60°N 102°W / 60; -102
{{Infobox protected area
| name = Four Corners, Canada
| map = Canada
| map_caption = Example using geographic coordinates
| coordinates = {{coord|60|N|102|W|display=inline <!-- for documentation page only - not general practice --> }}
}}

By default, {{Coord}} displays in the infobox only in the page title. Parameter |display=inline,title can be added to make the coordinates display at the top of the page as well.

TemplateData

revisa
TemplateData documentation used by VisualEditor and other tools
see the monthly parameter usage report for this template.

TemplateData for Infobox protected area

Sin descripción.

Parámetros de la plantilla

ParámetroDescripciónTipoEstado
Namename

Name of protected area

Cadenaobligatorio
Alternative Namealt_name

Common name for the protected area

Cadenaopcional
IUCN Categoryiucn_category

IUCN Category associated with the protected area

Cadenaopcional
Photophoto

Image for the protected area

Nombre de páginaopcional
Photo Widthphoto_width

Width of the image given by photo

Númeroopcional
Photo Alternative Textphoto_alt

Alternative text to be displayed if image doesn't appear for any reason

Cadenaopcional
Photo Captionphoto_caption

Caption for the photo

Cadenaopcional
Mapmap

Location map for the protected area

Nombre de páginaopcional
Mapmap_image

Map image for the protected area

Nombre de páginaopcional
Map Alternative Textmap_alt

Alternative text to display if the map doesn't display for whatever reasons

Cadenaopcional
Map Captionmap_caption

Caption for the map

Cadenaopcional
Map Widthmap_width

Width of the map

Númeroopcional
Reliefrelief

When the geographical coordinates method is used, any non-blank value will cause the template to display a relief map image

Cadenaopcional
Locationlocation

Location of the protected area

Cadenaopcional
Nearest Citynearest_city nearest_town

Nearest city from the protected area

Cadenaopcional
Coordinatescoordinates coords

When this option is used the type, region, scale, source, format and display parameters are not functional but this data can be entered in the {{Coord}} template.

Cadenaopcional
Coordinates Referencecoords_ref

Can be used with either coordinate display method above

Cadenaopcional
Lengthlength

Length of protected area

Númeroopcional
Widthwidth

Width of protected area

Númeroopcional
Areaarea

Area covered by protected area

Númeroopcional
Establishedestablished authorized created designated

The date on which the protected area was established, authorized, created, or designated

Líneaopcional
Visitation Numbervisitation_num

Number of visitors in a recent year

Líneaopcional
Visitation Yearvisitation_year

The year in which visitors were counted

Líneaopcional
Visitation Referencevisitation_ref

Reference of visitation data in <ref > </ref>

Cadenaopcional
Governing Bodygoverning_body administrator operator owner

The agency or organization which controls or owns the protected area

Cadenaopcional
World Heritage Siteworld_heritage_site

The year the protected area was designated a World Heritage Site

Líneaopcional
Websitewebsite url

The full URL of the official website with no formatting

Cadenaopcional
Childchild

Yes if infobox is embedded inside another infobox

Cadenaopcional
Embedded 1embedded embedded1

Another infobox to place within this infobox

Cadenaopcional
Embedded 2embedded2

Another infobox to place within this infobox

Cadenaopcional

Microformat

revisa

The articles created using this template include an hCard microformat. For more information read this.

Tracking categories

revisa

See also

revisa